ShenzhenYijiajie Electronic Co., Ltd.
The company advocates the corporate culture of "integrity and dedication, pragmatic innovation, unity and cooperation, diligence and progress", pays attention to standardized management, advocates
Add to Cart
4O2-LF 053-0000-000 Gas Oxygen SensorElectrochemical 0 ~ 25% Vol Oxygen In Gas Phase 4 Series
Product Description
This sensor is designed for the measurement of Oxygen concentration in gas phase. It can be used as the pin-to-pin replacement of the standard 4-series electrochemical Oxygen sensors which made by the other manufacturers.
Installation
Output signals from the sensor pins are different. Inappropriate use of the pins in product design will affect the sensor functionality.
Exposure to high concentrations of solvent vapors should be avoided under any condition. Mechanical overstress may cause deformation or cracks of the plastic enclosure of the sensor. If the sensor is used in extreme environmental conditions, please contact us for more details.
Datasheet:
| Zero Signal (20℃) | ±0.5% vol oxygen |
| Resolution | 0.1% vol oxygen |
| Linearity | The error is <±5%FS or <0.3%vol, whichever is the less |
| Theoretical formula | K*Ln(1/(1-c)) |
| Bias Voltage | -600 mV |
| Warm Up Time | 15 minutes |
| Repeatability | < ±5% |
