ShenzhenYijiajie Electronic Co., Ltd.
The company advocates the corporate culture of "integrity and dedication, pragmatic innovation, unity and cooperation, diligence and progress", pays attention to standardized management, advocates
Add to Cart
SHT75 Pin Type Temperature And Humidity Sensor Chip
The sht7x can be soldered using standard wave soldering. 20 seconds at a maximum temperature of 235°C. If manual soldering is used, the contact time should not exceed 5
seconds, the maximum temperature is 350°C. Note: After wave soldering, store the sensor at >75%rh for at least 12 hours to ensure that the polymer
of rehydration. Failure to do so will result in drift in sensor readings. The sensor can also be placed in a natural environment (humidity>40%rh) for more than 5 days
to rehydrate. In either case, whether manual soldering or reflow soldering, it is not permissible to rinse the board after soldering.
Datasheet:
| Model | SHT75 |
| Type | Humidity |
| Material | Mixture |
| Physical properties of the material | Semiconductor |
| Output signal | Digital |
| Sensitivity | ±1% |
