ShenzhenYijiajie Electronic Co., Ltd.
The company advocates the corporate culture of "integrity and dedication, pragmatic innovation, unity and cooperation, diligence and progress", pays attention to standardized management, advocates
Add to Cart
Product Description:
JSIR 350-4 MEMS Infrared Light Source Infrared Emitter For NDIR Gas Measurement
Features:
The infrared emitter, with 4 chips on the TO8 connector, is used to measure gases with low concentration or low absorption characteristics. The version with a windowless reflector in the standard TO8 housing is also suitable for long measuring distances from 30 cm. This MEMS-based filament emitter counterpart has a significantly longer lifetime and less drift.
Unlike filament infrared sources, the JSIR 350 Quad emitter is modulated/pulseable and does not require an additional chopper.
High-performance nanoamorphous carbon diaphragms can achieve diaphragm temperatures of up to 850 °C for long-term stable radiation output. The JSIR 350 Quad IR transmitter is ideal for a variety of gas analysis applications in industrial aerospace and other demanding applications.
IR illuminators can be used with MTS thermopile detectors or MPS pyro detectors. The combination with a Micro-Hybrid IR detector ensures better performance when analyzing gas concentrations and ensures accurate measurement results.
Performance characteristics
Wide emissivity 2-15 µm
Membrane temperature up to 850 °C
High radiation output
High modulation frequency
Long life (reliability due to high membrane stability)
HermeSEAL technology is available
Technical parameter Open / window N2 Unit
Spectral output range 2 ... 15 μm
Active area 2.2 x 2.2 mm2
Hot resistant 1 40 ± 20 Ω
Temperature coefficient 2 typ. 500 ppm/K
Time constant 0-63 % typ. 12.5 ms
Nominal power consumption 3 650 mW
Operation voltage 4 typ. 4.9 V
Operation current 4 typ. 132 mA
Recommended driving mode Power mode
Active area temperature 1,5,6 610 ± 30 °C
Window
Available: Sapphire, BaF2, CaF2, Si ARC, other on
request
Housing TO39
Estimated lifetime 7,8 > 5 000 h at 740 °C
> 100 000 h at 610 °C
Absolute max. ratings
Input power 3,5 1 200 mW
Housing temperature 8 185 without window,
85 with window °C
Active area temperature 850 °C
Specifications:
| Effective area [mm2] | 2.2 x 2.2 |
| Energy consumption | Normal |
| Wide emissivity | 2-15 µm |
| Membrane temperature up to | 850 °C |
