Wide measurement range: It can measure oxygen partial pressure from 0 mbar to 1500 mbar, corresponding to an oxygen concentration range of 0% - 100% vol. O2.
Fast response: The response time (t90) is less than 15 seconds (from air to 100% O2).
Good linearity: It has a linear output from 0% to 100% O2, which meets the requirements of ISO 80601 - 2 - 55.
Stable baseline: The baseline offset is less than 200 μV.
Temperature compensation: The temperature compensation is less than 2% O2 equivalent in the range of 0 °C to 40 °C.
Wide operating temperature range: It can work in the temperature range of -20 °C to +50 °C.
Wide operating pressure range: The operating pressure range is 0.5 bar to 2.0 bar.
High - humidity resistance: It can operate in an environment with a humidity range of 0% to 99% rh (non - condensing).
Low long - term output drift: In 100% O2, the long - term output drift is less than 5% signal loss per year.

Uses:

The MOX1 oxygen sensor is designed to monitor the partial pressure of oxygen in anesthesia (not including xenon), critical care, neonatal incubators, and general oxygen monitors.

Output	9 mv to 13 mv in 210 mbar O2
Measurement Range	0 mbar to 1500 mbar O2
Response Time (t90)	< 15 s (air to 100% O2)
Baseline Offset	< 200 μV
Temperature Compensation	< 2% O2 equivalent (0 °C to 40 °C)
External Load Resistor	10 kΩ minimum
Connector	3 - pin Molex header (Molex 22 - 29 - 2031)
Housing Material	White ABS
Weight	39 g (nominal)
Operating Temperature Range	- 20 °C to + 50 °C
Operating Pressure Range	0.5 bar to 2.0 bar
Operating Humidity Range	0% to 99% rh (non - condensing)
Long - term Output Drift in 100% O2	< 5% signal loss/year
Recommended Storage Temperature	- 10 °C to + 40 °C

Inquiry Cart 0