Package Type: SIP-4 (Single In-line Package) with cable harness.
Dimensions: Body length or diameter: 12.7 mm.
Weight: Approximately 4 g.
Pressure Port Type: Single axial barb port with 1.78 mm (0.070 in) or 5.0 mm (0.200 in) diameter flow channel, minimal dead volume.

Other Parameters:

Response Time: Max. 1 ms.
Shock: Certified to 150g per MIL-STD-202 Method 213 (150g half-sine, 11 ms).
Vibration: Complies with MIL-STD-202 Method 213 (150g half-sine, 11 ms).
Measured Media: Air, gases, liquids, etc., limited to media that do not damage polyetherimide, silicon, fluoro-silicone, silicone, EPDM, and neoprene seals.

Product Features:

Adopts piezoresistive micro-machined sensing elements with temperature compensation and calibration.
Capable of wet/wet differential sensing, measuring vacuum or positive pressure.
High cost-performance ratio.

Application Fields:

Suitable for medical devices such as nebulizers, kidney dialysis machines, blood cell separators, water control valves, etc.
Also applicable to other industrial scenarios requiring low-pressure measurement.

Sensitivity	Typical 3.33 mV/psi
Accuracy	±0.2%
Linearity	Typ. ±0.10% of span, Max. ±0.20% of span
Operating Temperature Range	-40°C to 85°C
Compensated Temperature Range	0°C to 50°C
Storage Temperature Range	-55°C to 100°C
Package Type	SIP - 4 (Single In - line Package) with cable harness
Dimensions	Body length or diameter: 12.7 mm
Weight	Approximately 4 g

Inquiry Cart 0