High Sensitivity: Optimized for low-flow applications (0–2 SLPM) with 100:1 turndown ratio .
Fast Response: 10 ms default response time enables real-time monitoring of dynamic processes .
Dual Output: Standard 0.5–4.5 VDC analog signal with optional RS485/RS232 for digital integration .
Robust Design: IP65-rated housing and corrosion-resistant materials ensure reliability in harsh environments .
Customizable Options:
- Flow Range: Available in 2/5 SLPM for MF4003; 10–50 SLPM for MF4008 .
- Interface: BSPT 1/4" (R thread) or quick-connect fittings (4/6/8 mm) .
- Calibration: Supports gases like N₂, O₂, CO₂, and argon (contact manufacturer for custom gases) .
User-Friendly: 4-digit LED display shows instantaneous flow (SLPM) and cumulative flow (SL), with push-button parameter configuration .

Applications:

Medical: Oxygen therapy systems, anesthesia machines, ventilators.
Industrial: Process gas control, compressed air monitoring, semiconductor manufacturing.
Environmental: Air quality analyzers, emissions monitoring.
Research: Laboratory gas chromatography, small-scale chemical synthesis.

Installation & Operation Notes:

Pipe Requirements: Install in straight pipe sections with ≥5× diameter upstream/downstream clearance .
Gas Compatibility: For gases other than air (e.g., CO₂, N₂O), specify during ordering to ensure accurate calibration .
Power Management: Ensure stable 8–24 VDC supply to minimize signal noise.
Calibration: Recalibrate every 12–24 months for optimal accuracy .

Measurement Range	0–2 SLPM (Standard Liter per Minute)
Accuracy	±(1.5% + 0.2% F.S.)
Repeatability	±0.25%
Response Time	10 ms (selectable up to 1000 ms)
Operating Pressure	≤0.5 MPa (72.5 psi)
Temperature Range	-10°C to +55°C (operating); -20°C to +65°C (storage)
Humidity Range	5–95% RH (non-condensing)
Output Signals	- 0.5–4.5 VDC analog (linear) - RS485/RS232 (optional)
Power Supply	8–24 VDC (<50 mA)
Interface Type	BSPT 1/4" (R thread)
Calibration	Air @ 20°C, 101.325 kPa (default)

Inquiry Cart 0