ACD3100 CO2 Sensor Module Infrared NDIR CO2 Gas Concentration Detection For Air Quality Monitoring
     
     
      	- Principle: ACD3100 is based on the non - dispersive infrared (NDIR) principle to detect the carbon dioxide concentration in the air. It is designed based on the spectral absorption principle of CO₂ gas. The sensor consists of three parts: a light source, a gas chamber, and an infrared receiver. When CO₂ flows into the gas chamber through the gas inlet and out through the gas outlet, it will absorb infrared light of a specific wavelength in the gas chamber. The change in CO₂ concentration will affect the infrared absorption amount, and then the infrared receiver will receive a light source signal of different intensities. The sensor calculates the CO₂ concentration by detecting the absorbance of infrared light of a specific wavelength.
   	- Features: It has excellent selectivity, no oxygen dependence, and a long - service life. It integrates integrated infrared absorption gas detection technology, a precise optical path design, and a high - precision dual - channel signal detection circuit to ensure the accuracy and reliability of the measurement results. In addition, it is equipped with a digital interface output, which provides users with a convenient data reading and interaction experience.
   	- Applications: It is widely used in many fields such as air quality monitoring, fresh - air systems, air - purification equipment, and HVAC equipment.
   
    ACD3100 Video Decoder:
      	- Basic Information: It is a single - channel video decoder produced by ACTi, with the model number ACD - 3100.
   	- Technical Parameters  	
  		- Video Resolution and Frame Rate: It supports full D1 resolution, with a frame rate of 25/30 fps (30 fps at 720×480 for NTSC, and 25 fps at 720×576 for PAL).
   		- Compression Format: It supports MPEG - 4 SP and ASP decompression.
   		- Audio Function: It has two - way audio function, with a 3.5 mm phone jack for audio input and two - way audio line output.
   		- Other Interfaces: It is equipped with serial ports for PTZ control panel, and has digital input and output functions. The communication ports include RS - 232, RS - 422, and RS - 485.
   		- Network Protocols: It supports a variety of network protocols, such as ARP, Bonjour, DDNS, DHCP, DNS, FTP, HTTP, HTTPS, ICMP, IGMP, NTP, PPPoE, RTP, RTSP, SMTP, SNMP, TCP, UDP, and UPNP.
   		- Ethernet Interface: It has an Ethernet (10/100 Base - T) interface, with an RJ - 45 connector.
   	
  	   	- Applicable Operating Systems: It is applicable to Windows 7, Windows Vista, Windows Server 2003, and Windows XP operating systems.
   
     
      	  		  			| Operating Voltage |   			DC (5.0±0.1)V, Ripple < 50mV |   		
  		  			| Operating Current |   			Average current < 45mA |   		
  		  			| Typical Power |   			100mW @5V |   		
  		  			| Measurement Range |   			400 - 5000ppm |   		
  		  			| Accuracy |   			±(50ppm + 3% of the reading) |   		
  		  			| Warm - up Time |   			120s |   		
  		  			| Operating Conditions |   			-10℃ - 50℃; 0 - 95%RH (non - condensing) |   		
  		  			| Storage Conditions |   			-20℃ - 60℃; 0 - 95%RH (non - condensing) |   		
  		  			| Data Refresh Frequency |   			2s |   		
  		  			| Service Life |   			> 10 years |   		
  		  			| Data Interface |   			I2C/UART |   		
  		  			| Pin 1 |   			SDA/RX (Sensor) Receive |   		
  		  			| Pin 2 |   			SCL/TX (Sensor) Transmit |   		
  		  			| Pin 3 |   			GND (Ground) |   		
  		  			| Pin 4 |   			VCC (Power Supply) |   		
  		  			| CRC Polynomial |   			0x31 (X^8+X^5 + X^4 + 1) |   		
  	  
     
    