ShenzhenYijiajie Electronic Co., Ltd.
The company advocates the corporate culture of "integrity and dedication, pragmatic innovation, unity and cooperation, diligence and progress", pays attention to standardized management, advocates
Add to Cart
AOD1000 High Pressure Submersible Oxygen Sensor High-pressure Oxygen Chamber Oxygen Concentration Sensor For Oxygen Monitoring
Product Introduction:
The AOD1000 is a high - pressure - resistant oxygen sensor, which can be used in high - pressure environments. Its interface model is a Molex 3 - pin connector. Different from the oxygen sensors for normal - pressure detection, its structure and composition enable it to withstand much higher pressure than ordinary oxygen sensors.
Working Principle:
It measures the oxygen concentration based on the voltage - divider electrochemical principle, and can achieve full - scale linear output.
Application Fields:
It does not require an external power supply during operation. After professional and accurate product calibration and temperature compensation at the factory, it is widely used in oxygen monitoring of high - pressure equipment, such as hyperbaric oxygen chambers, inspection ships, tankers, and other equipment.
| Parameter | Value | Unit |
|---|---|---|
| Measuring Range | 0 - 100 | % |
| Output Voltage (in Air) | 8.5 - 14 | mV |
| Response Time (T90) | < 10 | s |
| Linearity | Full - scale linear | - |
| Temperature Compensation | < 2% O₂ equivalent (0 - 50℃) | - |
| Load Resistance | ≥ 10 | kΩ |
| Interface | Molex 3 - pin connector (2.54mm) | - |
| Housing Material | Gray ABS | - |
| Weight | Approximately 25 | g |
| Operating Temperature Range | 0 - 45 | ℃ |
| Operating Pressure Range | 0.8 - 7.0 | bar |
| Operating Humidity Range | 0 - 99 (non - condensing) | %RH |
| Recommended Storage Temperature | 0 - 25 | ℃ |
| Expected Lifetime | 42 | months |
| Storage Lifetime | 6 | months |
| Shelf Life | 12 | months |
