ShenzhenYijiajie Electronic Co., Ltd.
The company advocates the corporate culture of "integrity and dedication, pragmatic innovation, unity and cooperation, diligence and progress", pays attention to standardized management, advocates
Add to Cart
Product Description:
YJJ 7O3 MST 7 Series Electrochemical Ozone Sensor Is Used For Gas leakage Monitoring (Multiple Ranges Available)
Features:
Model selection is as follows:
7O3-500ppb
7O3-1
7O3-5
7O3-10
7O3-50
7O3-100
7O3-200
7O3-5000
7O3-30000
Reproducibility: 1% output signal
Output linearity: Linear, regression coefficient R' - 0.999
Operating temperature range: 20℃ to +50℃
Humidity range: 15% to 90% RH (no condensation)
Operating pressure: Atmospheric pressure ± 10%
Pressure coefficient: < 0.02% signal/mBar
Baseline range: < ±0.4 HA
Long-term drift: < 5% signal loss/year
Bias voltage: Not required
Load resistance: 10 ohms
Built-in filter: None
Life: 2 years (in air)
Shelf life: 1 year (from the date of shipment)
Anti-interference characteristics:
The company requires the use of the target gas (the gas to be tested) for calibration and testing to ensure the accuracy of the detection and alarm equipment. The purpose of providing anti-interference data is to understand the cross-response characteristics of the sensor to certain other gases, rather than providing alternative gases for calibration; the response characteristics of cross-interfering gases are not guaranteed to be linear, and there will be significant cross-gas sensitivity variations among sensor batches. Therefore, if the cross-gas is used for calibration, the malt sensor cannot guarantee the accuracy of the detection and alarm equipment.
Specifications:
| Pressure | Atmospheric pressure ±10% |
| Pressure factor | < 0.02% signal /MBar |
| Baseline extent | ＜±0.4μA |
| Weight | 5 g |
