ShenzhenYijiajie Electronic Co., Ltd.
The company advocates the corporate culture of "integrity and dedication, pragmatic innovation, unity and cooperation, diligence and progress", pays attention to standardized management, advocates
Add to Cart
Product Description:
YJJ 26PCDFA6D 0-30Psi Differential Pressure Pressure Sensor Is Used In Field Of Industrial Pressure Detection
Features:
Pressure Sensors 22/24/26PC Series
Gage and Differential/Unamplified
Honeywell 1 MICRO SWITCH Sensing and Control 11-800-537-6945 USA1F1-815-235-6847 International 11-800-737-3360 Canada 17
GAGE SENSOR
Pressure is applied to port P2. Port P1 vents to ambient pressure
Mounting Dimensions (for reference only)
1 x 4 Termination (Style 1), Straight Port (Style A)
Pin 1 is notched, and is shown at the right of the package. Pin 2 is next to Pin 1, etc.
26PC SMT PERFORMANCE CHARACTERISTICS (AT 10 VDC ±0.01 VDC EXCITATION, 25 °C)
Min. Typ. Max. Units
Excitation Voltage — 10.0 16.0 Vdc
Response Time — — 1.0 ms
Input Resistance 5.5 k 7.5 k 11.5 k Ohm
Output Resistance 1.5 k 2.5 k 3.0 k Ohm
Span P2>P1(1) Min. Typ. Max.
0 to 1 14.7 16.7 18.7 mV
0 to 5 47 50 53 mV
0 to 15 96 100 104 mV
Null Offset Min. Typ. Max.
0 to 1 -2.0 0 +2.0 mV
0 to 5 -2.0 0 +2.0 mV
0 to 15 -2.0 0 +2.0 mV
Linearity (BFSL P2>P1) Typ. Max.
0 to 1 — ±0.50 ±1.75 % span
0 to 5 — ±0.50 ±1.5 % span
0 to 15 — ±0.50 ±1.0 % span
Null Shift 25 °C to 0 °C, 25 °C to 50°C(2) Typ. Max.
0 to 1 — — ±1.0 mV
0 to 5 — — ±1.0 mV
0 to 15 — — ±1.0 mV
Span Shift 25 °C to 0 °C, 25 °C to 50°C(2) Typ. Max.
0 to 1 — ±1.5 ±4.5 % span
0 to 5 — ±1.0 ±1.7 % span
0 to 15 — ±0.75 ±1.5 % span
Repeatability and Hysteresis Typ. Max.
0 to 1 — ±0.2 — % span
0 to 5 — ±0.2 — % span
0 to 15 — ±0.2 — % span
Overpressure P2>P1; P1>P2 Typ. Max.
0 to 1 — — 20 psi
0 to 5 — — 20 psi
0 to 15 — — 45 psi
Notes:
1. Span is the algebraic difference between output at maximum rated operating pressures and output at 0 psi.
2. Temperature error is calculated with respect to 25 °C.
SPECIFICATIONS
Characteristic Description
Storage Temperature -55 °C to 100 °C [-67 °F to 212 °F]
Operating Temperature -40 °C to 85 °C [-40 °F to 185 °F]
Compensated Temperature 0 °C to 50 °C [32 °F to 122 °F]
Alignment Pins 0,86 mm [0.034 in] diameter pins extend through PCB
Port Diameter 1,88 mm [0.074 in] diameter uses standard 0,59 mm [0.0625 in] ID tubing
Port Orientation Parallel to PCB (low profile on board)
Pick Up Feature 3,18 mm [0.125 in] feature on port cover
SMT Solder · Sn 96.5 Ag 3.5 No Clean Flux
· Sn 63 Pb 37 No Clean Flux
SMT Reflow Profile Max peak temperature of 260 °C [500 °F] for 10 seconds
Media Compatibility Both ports are limited to media that are compatible with polyphthalamide,
fluorosilicone and silicon.
Shock Qualification tested to 150 g
Vibration MIL-STD-202. Method 213
(150 g half sine 11 ms)
Weight 0.5 grams [0.0176 oz]
Specifications:
| Output type | Analog |
| Installation style | Through Hole |
| Operating power supply voltage | 10V |
| Package / Housing | SIP-4 |
