High CO Selectivity: Optimized electrode and electrolyte design minimizes interference from common gases , ensuring accurate CO measurement.
Stable Three-Electrode Design: Reduces polarization effects and zero drift, improving reliability for continuous 24/7 monitoring.
Low Power Consumption: Suits battery-powered portable detectors, with minimal current draw during operation.
Easy Integration: Standard electrical parameters (bias voltage, load resistor) and compact form factor simplify integration into existing detection systems.
Wide Environmental Adaptability: Performs reliably across a broad temperature and humidity range, suitable for indoor/outdoor industrial and residential use.

Typical Applications:

Industrial Safety Monitoring: Factories, mines, refineries, and construction sites where CO may be generated from combustion or chemical processes.
Consumer Safety Devices: Home CO alarms, portable gas detectors for households, and vehicle exhaust detection tools.
Fixed Gas Alarm Systems: Permanent installations in warehouses, production areas, and public buildings to trigger alarms at unsafe CO levels.
Environmental Monitoring: Urban air quality stations and industrial emission testing equipment.
Medical & Rescue Equipment: Handheld detectors for emergency responders and confined space entry teams.

Target Gas	Carbon Monoxide (CO)
Nominal Measurement Range	0 – 1000 ppm (standard)
Maximum Overload	5000 ppm CO
Sensitivity (Typ.)	0.15 ± 0.03 µA/ppm
Resolution	1 ppm
Response Time (T90)	≤ 30 seconds
Repeatability	±2% of full-scale (FS) signal
Recommended Bias Voltage	+200 mV
Recommended Load Resistor	10 Ω
Operating Temperature Range	-20°C to +50°C
Storage Temperature Range	0°C to +20°C
Operating Humidity Range	15% – 90% RH (non-condensing)
Operating Pressure Range	Atmospheric pressure ±10% (86 – 106 kPa)
Baseline Offset (Clean Air)	0 to +5 ppm equivalent
Long-term Sensitivity Drift	< 2% signal loss per month
Expected Operating Life	2 – 3 years (in air, 20°C, 50% RH)
Storage Life	6 months (original sealed packaging)
Package Type	Standard electrochemical sensor package (compatible with most detectors)
Weight	Approx. 25 g

Inquiry Cart 0